Sub-catchment overview:

The floor heating divider and water collector (manifold) is a water distribution and MIXING SYSTEM-S5860 to connect the supply and return water of various heating pipes. Floor heating manifold or floor heating manifold, commonly known as water manifold.

The water separator is generally made of brass, and a small amount of stainless steel and plastic are used. The copper water divider is generally forged as a whole, the whole water divider is one, there is no splicing gap, and the water leakage of the water divider is prevented. The oxidation resistance and corrosion resistance of the water separator; the oxidation resistance of the stainless steel water separator and the plastic water separator is extremely strong. Water leakage; the plastic water divider is the water divider with the highest oxidation resistance and corrosion resistance, but it cannot accept direct sunlight, is easy to age, and is not suitable for long-term use.

The function of the floor heating water distributor: four basic functions: pressurization, decompression, voltage stabilization, and diversion.

Basic introduction of sub-catchment

It is divided into two parts: water distributor and water collector. The water distributor is a water distribution device used to connect various heating pipes and water supply pipes in the water system. The hot water is distributed to each branch through the water inlet pipe, and flows to each room through the floor heating pipe to achieve the effect of heating; the water collector is a water collection device in the water system, used to connect the return pipes of each heating pipe, and each The water in the room is collected in the water collector and conveyed into and out of the water pipes.

Accessories in the dispenser

Water distributor, water collector, filter, valve, exhaust valve, lock valve, joint head, inner joint head, heat meter.